AAC Block Adhesive

Product Description:

It is a factory prepared blend of carefully selected raw materials, Ordinary Portland cement and graded aggregates and polymers. Designed for use with water to produce high strength thixotropic mortar, for laying aerated light weight concrete, fly ash bricks, cement hollow blocks, cellular concrete blocks or smoothing over the block work surface in layer of upto 12mm thickness, that meet and exceed the requirement of National and international standards.

Application:

For interior and exterior use for preparing thin bed block mortar for ALC and cellular concrete blocks.

Suitable Substrates:

• Concrete brocks.
• Cement mortar blocks/bricks
• Concrete hollow blocks
• Aerated light weight blocks
• Cellular concrete blocks
• Fly ash bricks

Advantages:

• Long working time
• No curing required after block work is done
• Improved adhesion between two blocks
• Fast & economical
• Smooth & creamy.
• Single component – Just add water

Coverage:

Approximately 240 sq.ft. per 40 kg bag when used at 2 mm bed thickness. Coverage is based on smoothness and evenness of the substrate, size of blocks used and the thickness of mortar used. A general guide line for coverage of mortar is given when used with 28% water added to powder.

Note : Coverage is based on the block size of 600mm X 200mm X 100mm

Packaging : 40 Kg Bags

Colour : Grey